Home » Categories » Installation Videos » Canon

Canon ipf cartridge collar removal PFI-101 PFI-102 PFI-103

Professional removal of Canon cartridge collars requires special tools.
Knowing how to do it properly with good instructions is 95% of the battle.
The proper tools can be substituted with onsite materials you can use as alternatives once you have a good understanding on how the proper tools are used.
See the attached document for the following items;
  • How to remove the bottom collar from Canon ipf imagepregraf PFI-101 PFI-102 or PFI-103 inkjet ink cartridges
  • How to replace the chip(s) on the above cartridges in case you need our compatible chips
  • How to reassemble the collar properly to a Canon cartridge or to a refillable cartridge
In the Case of moving the factory OEM chip AND collar to our refillable you only need to ensure
  1. Correct orientation / facing of the chip Glance at a factory original cart while replacing your chip/collar
  2. Correct security of the collar to the refillable cartridge (Use a strong tape and attach securely)
2.33 (3)
Article Rating (3 Votes)
Rate this article
  • Icon PDFExport to PDF
  • Icon MS-WordExport to MS Word
Attachments (1) Attachments
Comments Comments
There are no comments for this article. Be the first to post a comment.