Home » Categories » Installation Videos » Epson

Epson Workforce 545 Refillable Ink Cartridges Installation T126 T125

Installing our NEW REFILLABLE Cartridges NEVER GOT EASIER THAN THIS!
Compatible Systems are Epson chip encoding for #125 and #126 ink cartridges.
Resetting ALL positions to Full (RATF) Damper Cart Systems OR Single Resetting Refillable cartridges than play alongside epson cartridges or completely remove and use just ours.
Initial Filling of China Carts Video Tutorial;
Initial Filling and chip Installation of our own InkJetCarts Damper Cart with RWTF (Reset Whenever You Want to all positions to Full Chip);

Systems Shown in Video;
  • Single Refillable Cartridges with permanent onboard resettable chips. These chips are reset by short circuit of two points on the chip at any time you wish to do so. Requires removal from printer for resetting. Should be refilled any time the chip is reset. Can be installed alongside Epson original carts. No modifications to printer required at all.
  • Damper Refillable Cart System with permanent fixed board resettable RATF gang chip. Pushbutton reset of all 4 positions to full at a single press, REQUIRES an out of ink signal on one position to enable all 4 positions to reset at a single event. Dampers and Chip STAY in printer for refilling and resetting. No need to ever remove any component. Requires complete removal of all 4 epson carts for installation. No Modifications to printer required at all.
Compatible with Epson Models;
  • Epson Stylus NX330 NX430
  • Epson Workforce 435
  • Epson Workforce 545
  • Epson Workforce 630 633 635 645
  • Epson Workforce 840 845
  • Epson Workforce 60
SEE THE TWO TYPES OF RESETTABLE REFILLABLE SYSTEMS WE HAVE IN THE VIDEO BELOW
(Scroll Over Right Hand Upper corner of video frame to see PART 2):
4 (4)
Article Rating (4 Votes)
Rate this article
  • Icon PDFExport to PDF
  • Icon MS-WordExport to MS Word
Attachments (1) Attachments
Comments Comments
There are no comments for this article. Be the first to post a comment.